Images are symbolic and represent the current or similar article with the same characteristics.
Related
Related products
4-Frames Self-turning extractor, 180W motor, programautomatic, barrel 76 cm, frames 26,5 x 48 cm
4-Frames Self-turning extractor, motor 110W, barrel 76 cm, frames 28,6 x 48 cm
Extractor 4F self-turning,motor 110W, barrel 76
It is important that you choose a honey extractor that suits your frames. Each honey extractor indicates the maximum size of the frames that can be extracted. In general, we can say that the honey extractor is suitable if your frames are smaller than or equal to the maximum specified size of the frames. Due to the different frame systems, it is best to check the actual size of your frames before purchasing and to send us this information so that we can advise you.
You can measure the frames with the help of this form and tell us the dimensions when ordering. In this way, we can guarantee that the selected honey extractor will also fit.
For a surcharge of 61,00 EUR it is in most cases possible to adapt the basket to your frames.
Click here for the measuring form.
The selected honey extractor you can use for frames that are not larger than: 31 x 48 cm (A x B)
The honey extractor is suitable for the following frames:
Detailed: German Normal [unit size] (223 x 370 mm), German Normal, flat (159 x 370 mm), German Normal, half (110 x 370 mm), Hoffmann, large (260 x 410 mm), 4/3 Zander, breeding room (300 x 420 mm), 4/3 Zander, honey room (150 x 420 mm), ZaDant (285 x 420 mm), Zander (220 x 420 mm), Zander, flat (159 x 420 mm), Zander, half (110 x 420 mm), Austrian broadwave (255 x 426 mm), Dadant Leaf, Incubator (300 x 435 mm), Dadant leaf, honey room (159 x 435 mm), Dadant [modified], Incubator (285 x 448 mm), Dadant [modified], honey room (141 x 448 mm), Dadant US, Incubator (285 x 448 mm), Dadant US, honey room (160 x 448 mm), Langstroth, flat, 1/2 (137 x 448 mm), Langstroth, flat, 2/3 (159 x 448 mm), Langstroth, flat, 3/4 (185 x 448 mm), Langstroth, whole (232 x 448 mm), Langstroth, Jumbo (285 x 448 mm),
Honey extractor basket
The self-turning honey extractors are intended primarily for beekeepers who deal with the extraction of viscous honey. Their advantage is that the frames, which are protected within the honeycomb cassettes, are automatically turned during the extraction process.
Features
Honey extractor with a fully automatic drive with frequency converter
The honey extractor is equipped with a fully automatic drive. The automatic drive ensures that the entire extraction cycle is automatic. There are 8 pre-set programs that can be changed as required. The drive is extremely quiet.
Extra quiet drive
The automatic drive with the frequency converter and the Siemens motor guarantee a particularly quiet operation.
Inclined bottom
One of the most vaunted benefits of the honey extractor is the innovative bottom that is inclined towards the outlet, which makes it possible for the honey to drain out of the extractor more easily and completely. In addition, the bottom is seamlessly welded, which greatly simplifies cleaning.
Two stainless honey taps
The honey extractor has two stainless honey taps. One is installed at the lowest possible bottom point, which ensures that all the honey can drain from the honey extractor.
Ballast
Large-size extractors have two honey taps. The bottom tap serves the purposes of complete drainage, whereas the top one is installed a little higher, so there is always some honey left at the bottom of the barrel as the ballast for further stabilisation of the extractor. This makes the extractor more stable whenever extraction involves frames of different weights.
Seamlessly welded
The bottom of the honey extractor is innovatively manufactured and welded without inner edges, which makes cleaning much easier.
High-quality materials
The honey extractor is made of high quality polished stainless steel, which gives the honey extractor sustainability. All parts that come in contact with honey are made from approved materials that are suitable for food and have a corresponding certificate.
Stable legs
The honey extractor has three extremely robust and stable legs that are easy to assemble.
Transparent lid
The honey extractor has a transparent lid made of acrylic glass, which allows the monitoring of the extraction process.
Two carrying handles
The honey extractor has two built-in carrying handles that make carrying easier.
CE certificate
The honey extractor has a CE certificate, which means that it has passed a strict quality control and is suitable for sale in the EU market.
Suitable for food
All of the honey extractor parts that come into contact with honey are constructed of materials appropriate for managing foods and have been awarded the appropriate certificate.
2 years warranty on engine and components. Even after this time, we support you and provide repair service for your honey extractor.
The honey extractor is equipped with a quality engine from Siemens.
High quality workmanship and longevity
Logar honey extractor - synonymous with longevity, innovative solutions that make work easier, reliable service and spare parts.
Drive type: Fully automatic drive
The honey extractor is equipped with a fully automatic drive, which we recommend for self-turning and larger radial honey extractors. The automatic drive ensures that the entire extraction cycle is automatic. There are 8 pre-set programs that can be changed as required. The drive is extremely quiet. The power plug is a "Schuko plug".
Features
| Drive | Motor 180W Programautomatic |
| Number of frames | 4 |
| Inner / outer barrel diameter | 29.92/31.10 " (76/79 cm) |
| Barrel height with / without drive system | 28.74/36.61 " (73/93 cm) |
| Height from ground to the honey tap | 15.74 " (40 cm) |
| Honey tap | Φ1.49" + Φ1.65" (Φ38 mm + Φ42 mm) |
| Weight | 65 kg |
| Overall height | 44.09/51.96 " (112/132 cm) |
| Sheet thickness coat/bottom | 0.8 / 1.0 mm |
| Honey extractor type | Self-turning honey extractor |
| Speciality | Fully automatic drive with frequency converter |
| Grating surface of the frame basket | 31,3 x 40 x 4,5 cm |
| Maximum frame size | 31 x 48 cm |
Original Logar Accessories
Rubber feet for extractor with screw M10
Rubber feet for extractor - 3 pcs with screws.
+£21.30
Bottom heater 566W incl. assembling
When the bottom is warm, the honey flows faster from the honey extractor and flows faster through the strainers.
+£647.10Guarantee and purchase without risk
100% satisfaction guarantee
When you buy a honey extractor on our website you do not have to worry about whether you will be satisfied with the product. We guarantee a 100% Satisfaction Guarantee - if the product does not meet your expectations, you can return it within 14 days and we will refund the purchase price.
50% deposit, the rest after delivery
Since we want to make sure that you feel safe and undoubted when placing an order, we offer you the option of paying only 50% of the purchase price when ordering, and the remainder after delivery.
We believe and we know that the Logar honey extractor will absolutely delight you .
Product warranty
All honey extractors are tested before they leave the factory so they are guaranteed to function properly .
Honey extractors have up to 2 years warranty. In the event of a problem, Logar's development engineers will be available to advise you and provide the necessary replacement parts.
Payment methods
Payment by bank transfer or Master Card, Visa, American Express (Paypal).The steps of an order
1. Put the desired items in the shopping cart and make the order. Write us your further wishes. 
2. We check the order and send you the order confirmation.
3. You make a 10% down payment.
4. We prepare the ordered items and inform you when we can ship.
5. You will receive the ordered products and pay for the rest.
Ordering the items is very easy and convenient.
Shipping on a pallet to your door
The selected products are packed on a pallet and shipped by a freight carrier (Gebrüder Weiss or Kuehne + Nagel Spedition).
Shipping on a pallet is used for larger orders, when the products can not be sent in a package by post, but it is necessary to transport the products on a pallet with a truck.
Such a delivery is more reliable, because the package is not swirled around on various conveyor belts. Your pallet is treated individually and brought to your home by a truck.
Kombinieren Sie die Honigschleuder mit der besten Unterstell-Siebkanne die sich nicht verstopft
The under-sieve with a sieve that does not clog up!
With a 4-honeycomb to 6-honeycomb self-propelled or a radial spinner for 9 honeycombs, you can usually work a full day before the fine sieve must be cleaned.
Get to know the world-class Logar honey extractors
Logar honey extractors are designed and manufactured with the utmost care by the renowned Slovenia-based company Logar trade d.o.o.. Their outstanding quality and reliability makes Logar honey extractor highly popular with beekeepers all over Europe. Since the company was founded in 1980, satisfied customers have noted that Logar honey extractors are synonymous with longevity and innovative solutions that make work easier. Reliable service and spare parts are guaranteed.
How to choose the right honey extractor?
Please send us an e-mail to info@honigschleudern.eu and send us a completed form for the measurement of the frames.
3 main types of honey extractors
Tangential honey extractors - for hobbyists
Tangential honey extractors are the most universal, because they are suitable also for the extraction of frames of the largest dimensions. That's why they are best for hobbyists beekeepers. During extraction, the frame is positioned tangentially in relation to the barrel to allow honey to drain more easily. Also available are extractor baskets without the middle axle, which makes it possible to turn the frame around without taking it out from the basket.
Radial honey extractors - for low-height beehive frames
Radial extractors are a perfect solution for beekeepers with low-height beehive frames. The frames are placed vertically around the axis in the basket, similar to the spokes on a bicycle.The centrifugal force and the natural tendency of the cells during rotation ensure that both sides of the frame are emptied simultaneously. In other words, it is no longer necessary to turn the frames in the honey extractor.
Self-turning honey extractors are intended primarily for beekeepers who deal with the extraction of viscous honey. Their main advantage is the self-turning of frames during the extraction process, which allows the entire process to be carried out completely automatically. During extraction, the honeycomb is within the cassettes, which protect it from getting damaged.
3 drive types for the honey extractor
How to choose the drive for the honey extractor?
There are three different drives available for the honey extractors:
- Manual drive intended for smaller honey extractors
- Motor drive intended for medium sized honey extractors
- Fully automatic drive intended for larger radial honey extractors and for self-turning extractors
Manual drive
The manual drive gear is recommended for smaller-sized honey extractors and is the most cost effective option. By turning the handle to the right the basket gets rotated and by turning it to the left the basket comes to a stop.
Check out all honey extractors with manual drive >>
Motor drive
Motor drive is recommended for radial and larger honey extractors. The motor is an AC motor. With the regulating lever, you determine the direction of rotation and the speed to the right and left steplessly. The power plug is a "Schuko plug".
Check out all honey extractors with motor drive >>
Fully automatic drive
We recommend the fully automatic drive for self-turning and larger radial honey extractors. It makes possible for the entire extraction process to take place automatically and independently. Automation features eight pre-set programmes that can be changed at will. The drive is extremely quiet. The power plug is a "Schuko plug".
Check out all honey extractors with fully automatic drive >>Related
Related products
4-Frames Self-turning extractor, 180W motor, programautomatic, barrel 76 cm, frames 26,5 x 48 cm
4-Frames Self-turning extractor, motor 110W, barrel 76 cm, frames 28,6 x 48 cm